New Items

Product Details:

The device measures gas pressure, vacuum inside the manifold and gas temperature inside the gas line. The PS-04 measuring system is designed for LPG (propane-butane) and CNG (methane) gas injection systems in all cars, regardless of engine power, including turbocharged ones.  The device ensures excellent performance, regardless of gas quality, driving style and vehicle load.
Operating flexibility.
The device operates perfectly both at high and low gas flow rates. This effect has been achieved by using modern high quality sensors and electronic components that allow precise information to be sent immediately to the Autogas controller. Gas flow fluctuations do not affect the quality of temperature measurement.

Additional Information:

• Production Capacity: Regulare
• Delivery Time: immediately
• Packaging Details: Standered

Reducer: device through which the liquid gas is converted to gaseous phase, reducing and adjusting its pressure.4Changeover Switch: allows user to switch between gas and petrol and indicates the level of gas in the tank.7LPG Tank: tank for LPG in liquid and gaseous phase.2Filter: filters the gas, it has sensors that measure temperature, pressure of the gas and manifold pressure.5Gas ECU: receives signals from various sensors, calculates and provides the parameters for gas operation. 8Multivalve: allows gas into and out of the tank, measures the level of gas in the tank and is equipped with various safety devices.3Injector Rail: injects sequentially the correct amount of gas into each cylinder.6LPG refueling port: device through which the cylinder is filled.

Additional Information:

• Minimum Order Quantity: 5 Pack

Product Details:

STAG is the most compact AEB ECU and it is perfect for installation in small spaces. Furthermore it has an very good quality/price ratio.
STAG uses a 32-PIN automotive connector and requires a minimum number of connections to sensors and actuators: for this reason its installation is much simpler comparing to other ECUs.
STAG ECU is designed for 3-4 cylinders multipoint timed sequential injection engines. While running on gas, the STAG ECU, according to fuel injection time, gas temperature and gas pressure, calculates the gas quantity to be injected in gaseous form in the intake manifold for replicating the performance of the engine running on petrol STAG is equipped with a diagnosis system on every Gas component, which is monitored by the calibration software during the installation of the system and all along the engine lifetime.

Additional Information:

• Item Code: STAG-ECU
• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: COIMBATORE
• Production Capacity: medium
• Delivery Time: Based on location

The reducer is distinguishable due to its compact size and unique design comprising two aluminum castings and a cover made in the ACtherm system preventing gas cooling, thus providing an excellent thermal insulation. Due to its unique design, the STAG R02 EL heats up very quickly, thus, switching to gas is also performed quickly. Therefore, no additional work of the controller, such as temperature correction, is required. Its high thermal efficiency and resistance to LPG contamination makes the reducer the best choice when selecting autogas system components.

Advantages:

• built-in solenoid valve and filter,
• small dimensions,
• compact design,
• easy filter replacement,
• excellent thermal efficiency,
• stable adjustments,
• resistance to LPG contaminations,
• pressure stability independent of cylinder inlet pressure,
• low pressure drops at high loads,
• mounted with a single centrally located bolt,
• replaceable elbow connector system.

Technical specification

 

Tomasetto LPG pressure reducer, model AT09, is an electronic single stage reducer, suitable for sequential injection systems. Compact and reliable, it is homologated in accordance with the European Regulation ECE 67R-01 and 10R-03. 
This reducer is equipped with a solenoid valve and an integrated filter unit at its inlet, in order to reduce the overall costs and permit an easier and faster installation. 
Outlet pressure is adjustable from 0.09 to 0.18 MPa (pressures calculated with the reducer disconnected from the engine). 

Additional Information:

• Minimum Order Quantity: 1 Unit

Essential for use in cars generating fault codes associated with the fuel pressure while the engine is running LPG/CNG.
FPE-A model is equipped with an automatic setting signals, giving enhanced use of other new car models, such as:
Opel Astra IV, Opel Insignia, Chevrolet Captiva, Volvo S40, S60, S60R, S80, XC70, XC90.

Additional Information:

• Minimum Order Quantity: 10 Piece

Data Recorder by AC S.A. was deigned to record LPG controller’s data (STAG-200, STAG-300, STAG-300 Plus, STAG-300 Premium, STAG-4) during the routine vehicle exploitation. It is the LPG system’s “Black Box” which communicates with the ECU by connecting to its diagnostic outlet and the + cable (red) at the ignition. The data is recorded on a memory card in .osc format and it can be opened in AcGasSynchro by choosing “Recorder”.
The Data Recorder also creates the event registry containing information about the time of particular event and its description.
Recording begins from the moment the engine is ignited and continues even after the loss of power. Additionally, there is an option to record particular event by pressing the button fitted in the driver’s cabin. In case of LPG system malfunction (e.g. the engine shut off on LPG) the particular moment can be marked in the recorder by pressing the button, along with the current date and time. This helps to analyze the marked recorded data and detect the cause of installation malfunction. Transfer of the data can be done by USB port where The Data Recorder is recognized by the computer as an external hard drive and the data can be copied for future use. There is a 2 GB memory card (updatable to 4 GB) used in the recorder, so it can also be used as Pen-drive. There are two LEDs (green and red) signalizing the working state of the devise. The green diode signalizes the on going data recording process and the potential lack of communication with STAG and red diode signalizes possible errors.
You are welcome to purchase our Data Recorder directly from AC S.A, if you are an authorized AC S.A distributor, or through your local distribution network.

Additional Information:

• Minimum Order Quantity: 1 Piece

WPG-2 (90 Ω increasing). Resistance equals 0 Ω with an empty and 90 Ω with a full gastank. WPG-4 (50 kΩ decreasing) Linear characteristic. Resistance equals 50 kΩ with an empty and 0 Ω with a full gas tank. WPGH-1 Non-contact (Hall sensor) gas level indicator with a linear voltage output. Voltage equals 0V with an empty and 5 V with a full gas tank.

The device has been designed for trouble-free, short-range communication between a STAG gas injection controller and a PC with a Bluetooth module installed. Communication between electronic units is based on wireless technology, so no additional cables are required and switching between the specific electronic equipment (laptop or PC equipped with the module) is fast and easy.

Bluetooth Next is equipped with the latest radio communication module ensuring an excellent connection to the controller, and particularly trouble-free communication with controllers based on the new STAG platform (GoFast, QBox Basic and QBox Plus).

Benefits:
• wireless communication with a PC,
• connection of the device to a vehicle does not require additional cables,
• compatibility with any laptop or PC equipped with the module,
• support for all STAG controllers.

The interface is based on the certified Bluetooth device, No. B017632.

Additional Information:

• Minimum Order Quantity: 5 Piece

The STAG AFR kit has been designed for quick installation and removal. The power supply is provided from the lighter receptacle (12V) and communication with a PC requires a standard USB interface, RS232 interface or Bluetooth. The module is operated through a special, dedicated application compatible with Windows, which is user-friendly and easy to use, offering additional benefits of the system.

Possible applications:
1. adjustment of the fuel system of carburetor and injection based fueling systems,
2. calibration of autogas systems in any generation available on the market,
3. diagnostics of fuel systems,
4. diagnostics of factory-mounted oxygen sensors,
5. control of the AFR to the engine,
6. calibration of chip-tuning systems.

Additional Information:

• Minimum Order Quantity: 1 Piece

In order to provide our end customers with products, which meet all their expectations regarding quality and operation, we have created MINIKIT AC.

 

MINIKIT AC is a LPG kit including STAG-300 plus or STAG-4 controller with wire set and accessories (pressure sensor, two temperature sensors, petrol/LPG switch, LPG level indicator, buzzer, software, and cable ties), reducer, injection rail and gaseous phase filter. In our kits, only those components which have been tested for reliability and appropriate configuration have been used. As the result of our efforts, we offer a few dozen of MINIKITS AC for 3, 4, 5, 6 and 8-cylinder engines.

 

When selecting MINIKIT, please make sure that the reducer matches the engine power (sometimes it is necessary to use two reducers).

Product Details:

Cng reducer

Additional Information:

• Minimum Order Quantity: 1 Piece(s)